loading
JYM-15-50-06-AZ-PS2.0
| Availability: | |
|---|---|
| Device Uncertainty | Urel≤0.2%（k=2） | |
| Flow Stability | 1.0% for start‑stop method; 0.2% for other methods | |
| Test Medium | Purified tap water | |
| Operating Humidity | ≤ 93% RH | |
| Operating Water Temperature | 20 ℃ ± 10 ℃ | |
| Water Temperature Fluctuation in Single Measurement | Water temperature fluctuation in a single measurement | |
| Water Fluctuation Coefficient per Cycle | ≤ ± 0.1% | |
| Water Source Working Pressure | 0.0–0.5 MPa (adjustable) | |
| Air Source Working Pressure | 0.4–0.7 MPa | |
| Device Operating Temperature | 4–50 ℃ | |
| Number of Meters Under Test | DN15: 10 pcs | DN20: 8 pcs | DN25: 6 pcs | DN32/40/50: 1 pc | Vertical water meters (DN15/DN20/DN25): 6 pcs | Vertical water meter (DN32): 2 pcs | Vertical water meter (DN40): 2 pcs | Vertical water meter (DN50): 1 pc | |
| Water Pump | 1 × Nanfang CHM10‑50 (flow rate: 8 m³/h, head: 48 m); 1 × TD50‑40G/2 (flow rate: 50 m³/h, head: 30 m) | |
| Water Tank | 2000 L | |
| Commutator | DN25 & DN50 cross‑fork pneumatic open commutator; low noise, high sensitivity; travel difference 0 ms; uncertainty within 0.002% | |
| Meter Clamping Mechanism | Dual‑cylinder outward‑push series pneumatic clamping mechanism; single pneumatic clamps for front 10 and rear 5 positions | |
| Water Meter Seal Test | Pressure range: (0–2.0) MPa | |
| Bore Diameter | Φ50 mm, telescopic stroke ≥ 80 mm | |
| Timer | (10–100) kHz (adjustable); better than 10⁻⁶ | |
| Calibration Signal | Pulse signal, f = (0–10) kHz | |
| Vacuum System | Differential pressure vacuum generator; vacuum water filling to keep water meters fully filled | |
| Supported Operation Modes | Fully automatic, semi‑automatic, touchscreen manual operation | |
| Acquisition Equipment | 10 sets of mobile phones with ≥ 40‑megapixel resolution | |
| Standard Device | Piston prover method | |
| Flow Range | （0.003-40）m³/h | |
| Calibration Method | Start‑stop method | Flow–Time Method |
| Rotameter Instantaneous Flow Display Basic | LZ/W30-15 4-90L/h | |
| LZ/W30-25 20-500L/h | ||
| LZ/W30-25 120-1600L/h | ||
| LZ/W30-50 500-8000L/h | ||
| LZB-80 7000-40000 L/h | ||
| Electromagnetic Flow Meter Instantaneous Flow Display Advanced (Class 0.5) | DN2：3-90L/H | |
| DN10：20-500L/H | ||
| DN25：500-800L/H | ||
| DN50：8000-40000L/H | ||
