Views: 0 Author: Site Editor Publish Time: 2021-05-14 Origin: Site
1. After replacing the battery, you must cover the moisture cover, tighten the screw, otherwise the table does not work and the card is displayed E - 5.
2, regularly check the operation of smart water meters, pay attention to prevent freezing in winter.
3. If you are installed in the pipe but not delivered or for a long time (more than a week), please turn off the valve before and after the smart water meter, the company does not assume the consequences of this.
4. If the smart water meter appears electronic display and the stroke does not match or smrates, the meter is measured by the word wheel.
Winter protection points
: Water products must be used to prevent moisture and antifreeze. Although it is an advanced intelligent technology, it does not mean that the smart water meter \"Water is not invaded\", in order to ensure the normal operation of the water meter, it will check the water meter, low temperature, and keep warm at the same time. Good moisture cover.
2: Avoid contact with corrosive substances. Corrosive substances are deadly damage to smart water meter precision instruments, must not be contacted. In addition, strong collision and impact also cause damage to the smart water meter.
Three: Do not use magnetic strength or other appliances with strong interference functions close to the smart water meter, otherwise it will cause the function of the smart water meter, or even directly \"strike \".
